Level Transmitters

Level Transmitters

E2703

Fuel level sensor with RS232 interface

  • Accurate, reliable design
  • Easy installation
  • Stem cuttable to length
  • EIA232 serial interface
  • Omnicomm protocol
Level Transmitters

Description

Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.

High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.

Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.

Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 150 mm and L1600 mm, which may be cut to 300 mm. The maximum stem length is limited to L2400 mm.

Document

Technical Datasheet
CE Declaration

E2704

Fuel level sensor with RS485 interface

  • Accurate, reliable design
  • Easy installation
  • Stem cuttable to length
  • EIA485 serial interface
  • Modbus ASCII or Omnicomm protocol
Level Transmitters

Description

Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.

High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.

Stable construction
E2700 series transmitters are carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.

Adjustable stem length
The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit the majority of fuel tanks are L800 mm, which may be cut to 150 mm and L1600 mm, which may be cut to 300 mm. The maximum stem length is limited to L2400 mm.

Document

Technical Datasheet
CE Declaration

E2706

Fuel level sensor with CAN and 0-10 V

  • Accurate, reliable design
  • Easy installation
  • Stem cuttable to length
  • CAN interface, J1939 protocol
  • 0-10 V analog output
Level Transmitters

Description

E2706 with CAN interface and 0...10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and full digital signal processing ensure stable, accurate and reliable measurements.

The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user defined volume units.

E2706 is carefully engineered for best performance and reliability. The sensor stem is made of special light metal alloy for corrosion resistance and stiffness. The vertical slot in the stem reduces its clogging by residues in the fuel, facilitates cleaning and maintenance and improves the reaction time compared to closed tube geometry. The electronics box is completely sealed, providing protection from mechanical and corrosive impact.

The stem can be easily cut directly at the installation place up to 20% of initial length to fit into the tank. Two standard lengths that suit majority of fuel tanks are available: L800 mm which may be cut to 150 mm and L1600 mm which may be cut to 300 mm. The maximum stem length is limited to L2400 mm.

Document

Technical Datasheet
CE Declaration

E2713

Magnetic float level switch

  • Min, Max, Min+Max or up to 5 setpoints
  • Full stainless steel construction
  • NO, NC or changeover contacts
  • M12 connector or cable output
  • Water, oil or diesel level in tanks
Level Transmitters

Description

-

Document

Technical Datasheet
User Manual
CE Declaration

E2716

Magnetic float level transmitter

  • Water, oil or diesel level in tanks
  • Range from 100 mm to 1000 mm
  • Resolution 5 mm
  • Stainless steel or polyamide wetted parts
  • Analog output 4-20 mA
Level Transmitters

Description

-

Document

Technical Datasheet
User Manual
CE Declaration

E2718

Magnetic float level transmitter

  • Water, oil or diesel level in tanks
  • Range from 100 mm to 1000 mm
  • Resolution 5 mm
  • Wetted parts of stainless steel or PA
  • Two analog outputs 4-20 mA or 0-10 V
  • RS485 Modbus RTU digital interface
Level Transmitters

Description

Magnetic float level transmitter E2718 is a member of new PluraSensĀ® family of multifunctional measurement instruments. The transmitter is intended for level measurement of various liquids including water, beverages and fuel. Application include oil or diesel level control in tanks.

E2718 uses magnetic float and chained reed switches. E2718 provides two independent analog outputs OUT1 and OUT2, user-selectable to 4- 20 mA or 0-10 V, proportional either to level or internal temperature. RS485 Modbus RTU digital communication interface allows easy configuration of the instrument and its integration into various automation systems through Fieldbus network.

Document

Technical Datasheet
User Manual
CE Declaration