Pressure Transmitters

Pressure Transmitters

E2407

Barometric pressure transmitter

  • Combined pressure and temperature sensor
  • Excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • 2 x 4-20 mA or 0-10 V analog outputs
  • RS485 Modbus RTU digital interface
Level Transmitters

Description

Barometric pressure transmitter E2407 is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of the barometric pressure in residential, business and industrial indoor spaces.

RS485 Modbus RTU interface allows direct Fieldbus networking of the device. Two configurable analog outputs can be used to connect the transmitter with additional secondary instruments.

Document

Technical Datasheet
CE Declaration

E2408DF

Differential pressure transmitter-regulator

  • Ranges from -50...+50 Pa to -500...+500 Pa
  • 2 x 4-20 mA / 0-10 V outputs
  • Excellent repeatability and zero stability
  • Two analog outputs 4-20 mA or 0-10 V
  • Two SPST relays 230 V × 10 A for pressostat function
  • RS485 Modbus RTU interface
Level Transmitters

Description

Differential pressure transmitter E2408DF is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of pressure of air and non-aggressive gases with superb accuracy and no offset drift.

The differential pressure is measured by a thermal sensor element using flow-through technology. Compared with membrane based sensors, this features an extended dynamic range, better long-term stability and improved repeatability, especially near zero.

RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to connect the transmitter with additional secondary instruments.

Document

Technical Datasheet
User Manual
CE Declaration

E2418DP

Differential pressure transmitter

  • Ranges from 0...+250 Pa to -10...+10 kPa
  • Calibrated and temperature compensated
  • 2 x 4-20 mA or 0-10 V analog outputs
  • RS485 Modbus RTU digital interface
Level Transmitters

Description

Differential pressure transmitter E2418DP is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of low pressure of air and non-aggressive gases in HVAC applications.

RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to connect the transmitter with additional secondary instruments.

Document

Technical Datasheet
User Manual
CE Declaration