Temperature Transmitters

Temperature Transmitters

E2163

Universal 4-20 mA temperature transmitter

  • For most common RTDs and thermocouples
  • 4-20 mA two-wire output
  • High accuracy and stability at -40...+85 °C
  • Mounting into standard DIN B terminal head
  • Direct USB interface for PC configuration
Temperature Sensors

Description

Programmable transmitter E2163 with 4-20 mA current output is designed for mounting into DIN Form B terminal head of a temperature sensor or into IP65 rated enclosure to the wall.

The transmitter is intended for signal conditioning of most common resistance temperature detectors – Pt100, Pt500, Pt1000, Ni100, Cu50, Cu100, and most common thermocouples – Types B, J, K, L, N, R, S, T etc.

The sensor type, output scale, averaging time constant and other transmitter parameters can be easily configured using USB cable and the E2163 Configurator software.

Document

Technical Datasheet
CE Declaration
Configurator Software

E2227

Interior humidity & temperature transmitter

  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • Two configurable 0-10 V / 4-20 mA outputs
Temperature Sensors

Description

Humidity and temperature transmitter E2227 is intended for measurement of relative and absolute humidity, temperature and dew point value of air with high accuracy and stability.

The transmitter is designed for indoors use, target applications being home and office HVAC and building automation systems. Compact wall-mount slotted plastic enclosure provides natural ventilation of the sensors.

RS485 interface supporting industry standard Modbus RTU protocol allows direct Fieldbus networking of up to 240 devices. Analog outputs, user switchable to 0-10 V or 4-20 mA may be used to connect the transmitter to a range of secondary instruments, like display panels or controllers.

Document

Technical Datasheet
User Manual
CE Declaration

E2007-HF

Heat flux transmitter

  • Measurements from 2 to 2000 W/m2
  • Excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • 0-10 V or 4-20 mA analog output options
  • Ideal for building climate control
Temperature Sensors

Description

Heat flux transmitter E2007HF is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is designed to measure the heat that flows through the object in which or on which the heat flux sensor plate is mounted.

The heat flux is measured by a thermopile plate sensor element. E2007HF can be used for in-situ measurement of building envelope thermal resistance (R-value) and thermal transmittance (H-value) according to ISO 9869, ASTM C1046 and ASTM 1155 standards.

RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to connect the transmitter with additional secondary instruments.